INJORA INJMBL32-NANO-INM24 AXIAL SCX30 MBL32-NANO ESC & 1621 GREEN VIPER BRUSHLESS COMBO

$80.99
Article number: MBL32-NANO-INM24
Availability: Out of stock

INJORA MBL32-NANO Brushless ESC & 1621 Green Viper Motor 4300KV for 1/30 Axial SCX30

Note

  • Radio System: Not compatible with the stock SCX30 radio. A transmitter and receiver with a CH2 port are required.
  • Pre-configured and ready to run. No programming required.
  • USB programmer card is not included.
  • Please use a 2S LiPo battery only. (3S batteries may damage the 1621 Green Viper motor.)
  • Do not flash or modify the firmware yourself. Any damage caused by unauthorized firmware flashing or modification is not covered under the INJORA warranty.

Features

  • The INJORA MBL32-NANO is based on AM32 firmware and is specifically designed for RC crawlers with programmable functionality.
  • Smooth and linear low-speed control with powerful, aggressive high-speed performance.
  • Runs significantly quieter than brushed systems with virtually no motor noise.
  • Built-in BEC with adjustable output voltage: 6.0V / 7.4V.
  • Waterproof design for all-weather operation.
  • Supports PC programming via USB programmer card.
  • Multiple protection features including low-voltage protection, fail-safe protection, and rotor lock protection.
  • Reduced motor noise compared to brushed systems.
  • Protective sleeve at the wire outlet enhances durability.
  • Delivers precise low-speed control and strong high-speed performance.

ESC Specifications

  • Part Number: MBL32-NANO
  • Continuous Current: 25A
  • Peak Current: 45A
  • Battery Compatibility: 2S LiPo
  • BEC Current: 3A
  • Output Voltage: 6.0V / 7.4V Adjustable
  • Dimensions (L × W × H): 25.5 × 15 × 12mm
  • Weight: 9.5g (0.34oz)
  • Compatible Motors: INJORA 1621 / 1721 Series
  • Waterproof: Yes

Motor Specifications

  • Model Number: 1621
  • Motor Type: Sensorless Brushless Outrunner
  • Waterproof: Yes
  • Operating Voltage: 7.4V (2S LiPo)
  • KV Rating: 4300KV
  • Motor Slots: 9
  • Motor Poles: 12
  • No-Load Current (7.4V): 0.8A
  • Maximum Current: 12A
  • Motor Connectors: PH2.0 3-Pin
  • Dimensions: Ø15.5 × 21.5mm
  • Output Shaft Diameter: Ø1.7mm
  • Included Pinion Gear: 0.3 Mod 11T
  • Lead Length: 65mm
  • Weight: 15g

Package Includes

  • 1 × MBL32-NANO Brushless ESC
  • 1 × 1621 Green Viper Brushless Motor
  • 1 × Instruction Manual

 

 

This product was added on 06/01/2026 by JM.

0 stars based on 0 reviews