| Availability: | In stock |
Ghost RC Cobra 8 ACE No Prep Drag Combo – 4300kV Sensored Motor
Take your 1/10 scale drag racing to the next level with the Ghost RC Cobra 8 ACE No Prep Drag Combo, purpose-built for modern drag racing. Centered around a 4300kV sensored drag motor, this system is engineered to deliver controlled power, strong torque, and consistent performance for no-prep and sand drag racing conditions.
Overview
Designed for racers who value usable power and precise control, the Cobra 8 ACE combo balances acceleration, stability, and adaptability. The motor and ESC work together to provide smooth, predictable power delivery across varying track surfaces and conditions. This allows drivers to push harder off the line without sacrificing control, while the ESC’s advanced programmability offers tuning freedom both before and during runs. Durability and reliability are built in, so you can focus on competition rather than equipment concerns.
Key Features
4300kV drag-specific sensored motor
Adjustable endbell timing for fine-tuned performance
Stainless steel wrapped rotor for durability
550-size motor can with 5mm shaft and siamese pinion flats
Compatible with 2S–4S LiPo batteries
Cobra 8 ACE high-performance ESC with advanced programmability
8A peak adjustable BEC
Water and element-resistant construction
Smooth, predictable power for no-prep drag racing
Reliable and durable design for repeated competition use
Includes
(1) Cobra 8 ACE No Prep Drag Brushless ESC
(1) 1412 Drag Motor with Adjustable Endbell (4300kV)
(1) USB Connector
(1) Sensor Wire
Needed to Complete
QS8 Connector
Castle Creations 8S CapPack 2240µF Capacitor Pack (35V)
Specifications
ESC
Suggested Application: 1/10 No Prep Drag
Motor Type: Brushless – Sensored
Input Voltage: 2S–4S LiPo (7.4–14.8V)
Dimensions (L×W×H): 2.37×2.05×1.6 in (60.2×52.1×42.5 mm)
Weight: 173 g (6.1 oz)
BEC Voltage: 5.0–8.0V (5.5V default)
BEC Peak Current: 8A
Motor Connector: 6.5 mm Female
Battery Wire: 8 AWG
Motor Wire: 8 AWG
Programmable: Yes
Motor
Suggested Application: 1/10 No Prep Drag
Turn/kV: 4300kV
Size: 550
Type: Brushless – Sensored
Voltage: 2S–4S LiPo
Adjustable Timing: Yes
Shaft Diameter: 0.196 in (5 mm)
Motor Connector: 6.5 mm Male
Tech Notes
A capacitor pack must be installed for drag racing use.
High-current QS8 or 8 mm battery connectors are required.
System voltage must not exceed 14.8V to avoid permanent ESC damage.
Motor and ESC are not designed for submerged operation. Proper sensor wire connection is required for full motor performance.
This combo delivers a perfect balance of power, control, and reliability for competitive no-prep drag racing environments.
This product was added on 2/24/2026 by RG