| Availability: | In stock |
The FS Racing Model DT 1/7 Scale 6S Brushless 4WD Street Basher RTR is a large-scale performance RC vehicle designed for high-speed pavement runs, aggressive acceleration, drifting, and parking-lot bashing. Combining a long 410mm wheelbase with a wide 350mm stance and full-time four-wheel drive, the Model DT provides the size and stability needed to put serious brushless power to the ground.
Power comes from a 4274 2000KV 4-pole brushless motor paired with a Hobbywing 150A brushless ESC. A gyro-equipped 2.4GHz radio system helps improve stability, while an 18kg waterproof metal-gear steering servo provides responsive steering control.
The chassis is reinforced with CNC-machined aluminum components, while large oil-filled aluminum shocks and pivot-ball suspension help keep the vehicle controlled during aggressive street driving.
At approximately 710mm long and 350mm wide, the Model DT delivers the substantial size and road presence expected from a 1/7 scale vehicle.
Its 410mm wheelbase and wide stance provide a stable foundation for high-speed driving while the aggressive truck-inspired body gives the Model DT a distinctive street-basher appearance.
The Model DT is equipped with a 4274 2000KV 4-pole brushless motor paired with a Hobbywing 150A brushless ESC.
The system is designed around high-output LiPo power, providing strong acceleration and the performance needed for large-scale street bashing.
A full-time four-wheel-drive system distributes power to all four wheels for improved traction during acceleration and greater control when driving aggressively.
The 4WD drivetrain also helps make the vehicle more predictable during high-speed runs, cornering, and power slides.
The included 2.4GHz radio system features gyro assistance to help stabilize the vehicle.
Gyro assistance can help reduce unwanted fishtailing and make it easier to maintain control during hard acceleration, drifting, and high-speed pavement driving.
Steering duties are handled by an 18kg waterproof metal-gear servo.
The combination of metal internal gears and high-torque output provides the steering strength needed for the Model DT's large tires and substantial 1/7 scale chassis.
The Model DT incorporates several aluminum components to strengthen key areas of the chassis.
CNC aluminum front and rear shock towers provide rigid mounting points for the suspension, while a CNC aluminum center brace reinforces the chassis and helps reduce unwanted flex during aggressive driving.
A pivot-ball suspension system provides precise front suspension geometry while allowing the suspension to handle the loads generated by a large-scale, high-powered street vehicle.
Large oil-filled aluminum shock absorbers provide damping control and help keep the chassis composed over uneven pavement and during rapid weight transfer.
The Model DT uses different front and rear tire dimensions to complement its street-focused design.
The front tires measure approximately 43 x 100mm, while the wider rear tires measure approximately 53 x 107mm, giving the vehicle an aggressive stance while providing a larger rear contact patch.
1/7 scale street basher
Factory assembled RTR configuration
6S brushless power system
4274 2000KV 4-pole brushless motor
Hobbywing 150A brushless ESC
Full-time 4WD drivetrain
Gyro-enabled 2.4GHz radio system
18kg waterproof metal-gear steering servo
CNC aluminum front shock tower
CNC aluminum rear shock tower
CNC aluminum center chassis brace
Pivot-ball suspension system
Large oil-filled aluminum shock absorbers
Independent suspension
Large-scale street-focused chassis
Aggressive drift-truck inspired body
Wide 350mm stance
Long 410mm wheelbase
Staggered front and rear tire sizes
Designed for high-speed pavement driving
Suitable for parking-lot bashing and power sliding
Length: 710mm (27.95in)
Width: 350mm (13.78in)
Height: 200mm (7.87in)
Wheelbase: 410mm (16.14in)
Front Tires: 43 x 100mm
Rear Tires: 53 x 107mm
(1) FS Racing Model DT 1/7 Scale 4WD Street Basher RTR
(1) Hobbywing 150A Brushless ESC (Installed)
(1) 4274 2000KV 4-Pole Brushless Motor (Installed)
(1) 18kg Waterproof Metal-Gear Steering Servo (Installed)
(1) Gyro-Enabled 2.4GHz Radio System
(1) Painted & Finished Body
(1) Instruction Manual
(1) Compatible 4S or 6S LiPo Battery with XT90 Connector
(1) Compatible LiPo Battery Charger
(4) AA Transmitter Batteries
This product was added on 09/27/2026 by JM.