| Availability: | In stock |
Putting the X in Extreme!
The Mamba Micro X2 is a refresh of our popular Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle. Like its predecessor, it is waterproof* and has SENSORED MOTOR SUPPORT.
This ESC and Motor Combo is ideal for 1/14th and 1/16th scale vehicles, weighing up to 2.75lbs and up to 2s LiPo. The sensored 1007-8450kv motor allows for smooth startup with heaps of torque and low temperatures.
Important Product Update, 8/2/2022. Due to ongoing supply chain disruptions, we have been unable to manufacture the Micro X2. The parts in question are integral to the onboard 2-amp BEC. In an effort to provide the Micro X2 for sale again, we have removed the internal BEC and are including our external 10-amp CC BEC (a $24 value) with every Micro X2 purchase. This upgraded BEC has a wider range of BEC voltages and much higher current capacity. The retail price for the ESC and combos has not changed. For instructions on how to install the CC BEC, please visit www.castlecreations.com/microx2BEC.
FEATURES:
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
| ESC Technical Specs | |
|---|---|
| Input Voltage Range: | 2S-4S LiPo (16.8V Max) (2s MAX with included 1007-8450kv motor) |
| BEC Specifications: | No internal BEC in ESC. External 10-amp CC BEC Included. |
| Operating Environment: | Waterproof* design allows for use in nearly any environment; included CC BEC is not waterproof. |
| Brake: | Proportional |
| Reversible: | Yes, but may be disabled |
| On/Off Switch: | Yes, waterproof |
| Cooling Fan: | Not included |
| Size: | 41.6 mm x 29.4 mm x 21.3 mm (1.64" x 1.16" x .84") |
| Weight (with wires): | 1.66 oz / 47 grams |
| Connectors: | 4.0 mm bullets |
| Items Needed for Operation: | Battery Connector required: Castle 4.0mm Polarized Connectors, Deans Ultra Plugs and XT60 are recommended. |
| Product Use Statements: |
|
| Application Guidelines: | Ideal for 1/16th and 1/14th scale vehicles weighing up to 2.75lbs. |
| Max. Recommended Vehicle Weight: | 2.75lbs |
| Programmability: | Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) |
| Telemetry Link Capable: | Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters. |
| Tech Notes: |
*Although the Mamba Micro X2 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
|
| Motor Technical Specs | |
|---|---|
| Input Voltage Range: | 2s LiPo |
| Kv: | 8450 |
| Max. RPM: | 80,000 |
| Can Size: | Length: 50.3 mm Diameter: 28 mm |
| Weight (w/wires): | 4.05oz (114.8g) |
| Shaft Size: | Length: 15 mm Diameter: 1/8" (3.175 mm) |
| Mounting Hole Specifications: | M.5 @ 14mm & 16mm; M3 @ 19 mm |
| Connectors: | 4mm male Castle Bullet Connectors attached to replaceable 16 gauge wire; includes 210mm length sensored wire |
| Items Needed for Operation: | Compatible Electronic Speed Control (ESC) |
| Application Guidelines: | Ideal for 1/16th and 1/14th scale vehicles weighing up to 2.75lbs. |
| Recommended ESC(s): | Mamba Micro X2 |
| Running Modes: | SmartSense™ (with Castle Sensor capable ESC), Sensored and an ultra-efficient Sensorless mode. |
| Tech Notes: |
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. |
This product was uploaded by EG 12/14/2022