| Availability: | In stock |
Putting the X in Extreme!
The Mamba Micro X2 is a refresh of our popular Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle. Like its predecessor, it is waterproof* and has SENSORED MOTOR SUPPORT.
This ESC and Motor Combo is ideal for 1/14th and 1/16th scale vehicles, weighing up to 3lbs and up to 3s LiPo. The sensored 1010-5600kv motor allows for smooth startup with heaps of torque and low temperatures.
Important Product Update, 8/2/2022. Due to ongoing supply chain disruptions, we have been unable to manufacture the Micro X2. The parts in question are integral to the onboard 2-amp BEC. In an effort to provide the Micro X2 for sale again, we have removed the internal BEC and are including our external 10-amp CC BEC (a $24 value) with every Micro X2 purchase. This upgraded BEC has a wider range of BEC voltages and much higher current capacity. The retail price for the ESC and combos has not changed. For instructions on how to install the CC BEC, please visit www.castlecreations.com/microx2BEC.
FEATURES:
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
| Technical Specs Mamba Micro X2 ESC | |
|---|---|
| Input Voltage Range: | 2S-4S LiPo (3s LiPo Max with included 1010-5600kv motor) |
| BEC Specifications: | No internal BEC in ESC. External 10-amp CC BEC Included. |
| Operating Environment: | Waterproof* design allows for use in nearly any environment; included CC BEC is not waterproof. |
| Brake: | Proportional |
| Reversible: | Yes, but may be disabled |
| On/Off Switch: | Yes, waterproof |
| Cooling Fan: | Not Included |
| Size: | 41.6 mm x 29.4 mm x 21.3 mm (1.64" x 1.16" x .84") |
| Weight (with wires): | 1.66 oz / 47 grams |
| Connectors: | 4.0 mm bullets |
| Items Needed for Operation: | Battery Connector required: Castle 4.0mm Polarized Connectors, Deans Ultra Plugs and XT60 are recommended. |
| Product Use Statements: |
|
| Programmability: | Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) |
| Telemetry Link Capable: | Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters. |
| Tech Notes: |
*Although the Mamba Micro X2 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
|
| Technical Specs 1010-5600Kv Sensored Motor | |
|---|---|
| Input Voltage Range: | 2S-3S LiPo |
| Kv: | 5600 |
| Max. RPM: | 80,000 |
| Size: | Length: 59.5mm Diameter: 28.25mm |
| Weight (w/wires): | 5.17oz (46.5g) |
| Shaft Size: | Length: 15mm Diameter: 1/8" (3.17mm) |
| Mounting Hole Specifications: | M2.5 @ 14mm & 16mm; M3 @ 19mm |
| Connectors: | 4mm male Castle Bullet Connectors attached to replaceable 16 gauge wire; includes 210mm length sensored wire. |
| Application Guidelines: | Ideal for 1/14th and 1/16 vehicles weighing up to 3lbs and up to 3s LiPo |
| Max. Recommended Vehicle Weight: | 3lbs |
| Tech Notes: |
Running modes: SmartSense™ Sensored and an ultra-efficient Sensorless mode. |
This product was uploaded by EG 12/14/2022